RS-485 (Recommended Standard 485) is a standard maintained by the Electronics Industry Alliance (EIA). RS-485, also known as TIA/EIA-485-A, was created to meet the needs of electronic component designers for longer cable lengths, increased throughput and control of multiple devices.
The unique Z-Wave to RS-485 Converter is created to give the great wireless capability to those existing devices and products built with RS-485 communication ports. It provides an effective means to extend product lines without drastically redesigning existing products and systems. When Z-Wave to RS-485 Converter is used as the wireless link, existing products and systems may be extended with no disruption and easily to be included into a Z-Wave network.
Radio Z-Wave | |
---|---|
Radio Transceiver | Receiver sensitivity without SAW lter down to [email protected] |
Transmit mpower without SAW lter up to +6dBm | |
Z-Wave 9.6/40/100kbps data rates | |
Supports all Z-Wave sub-1 GHz frequency | |
RS-485 Side | |
Connector | Terminal Block |
Signals | RS-485-2w: Data+, Data-, GND |
RS-485 Data Direction Control | ADDC® (Automatic Data Direction Control) |
Z-Wave Communication | |
Baudrate | -21~+2.5dBm |
Output Power | ADDC® (Automatic Data Direction Control) |
High Sensitivity | [email protected]/s, -97dBm@40kbit/s, -93dBm@100kbit/s |
Appearance | |
Dimension | 94x56x27mm(LxWxH), 220 Gram |
Housing Material | Aluminum |
Color | Silver |
Environmental Limits Operating | |
Operating Temperature | -20 to 70°C |
Storage Temperature | -40 to 85°C |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Power Requirements | |
Source of Input Power | Terminal Block |
Input Voltage | 12V DC |
Input Current | 85mA @ 12V DC |
ESD Protection | Protects against two signals shorted together |
ZC-120-J
ZC-120-U
ZC-120-E